American Paragliding Home Page
Paramotoring and    
Powered Paragliding    

 Why?   Gallery   Products   Dealers   Weather 

 
Minari Assembly Instructions:

   Assembly
   Muffler
   Spark Plug
   Cage
   Harness
   Propeller
   Priming
   Break-In
   Minari Tips
   Minari Parts
   Minari Manual
   Fuel Tips

Paramotoring Products:
   Wings
   Motors
   Trikes
   Propellers
   Helmets
   DVD's

Minari Paramotor

Assembly: Spark Plug

(Ignition Parts)

First, gap the Spark Plug at 0.020 (0.5mm). Remove the protective foam insert from the Plug socket and screw the Spark Plug into place by hand. Tighten the Plug using a Spark Plug wrench or socket where you have good purchase on the tool.

Use red threadlock on the small top terminal threads (on the top of the Spark Plug) or the terminal WILL loosen and damage the spark plug boot!

Attach the Spark Plug Boot that comes from the Ignition Coil to the top of the Spark Plug and make sure it is securely seated.

The next step in the assembly is the Cage.

 

 Why?   Gallery   Products   Dealers   Weather 
American Paragliding Home Page
  Paramotoring & Powered Paragliding

  www.AmericanParagliding.com

Contact Us:
(805) 966-5900
info@americanparagliding.com

TrikeBuggy, Inc.
Santa Barbara, CA

TrikeBuggy PPG Trike  
www.TrikeBuggy.com  
All the information and images published in this website are property of TrikeBuggy, Inc. unless stated otherwise.
Reproduction of any part of these contents (info, graphics & pictures) by other website or media is strictly forbidden,
unless specially authorized by TrikeBuggy, Inc
© TrikeBuggy, Inc 2002– 2012
Please respect the rights and intellectual property of this Web site.